For planning, a mobile or manufactured home move can range from a few thousand dollars for a straightforward transport-only job to well above $10,000 when the home has multiple sections, needs full setup work, travels farther, or requires more permits, escorts and access coordination. Current consumer cost guides cluster many full-service single-wide moves around roughly $4,000-$10,000 and many double-wide moves around roughly $8,000-$20,000+. Those are planning bands, not quotes.
The same home can price very differently depending on whether the quote covers only hauling or also teardown, setup and related work.
A double-wide or other multi-section home creates multiple transport units and more setup coordination.
A short route can still be expensive if the load needs difficult routing, escort vehicles or extra site work.
Planning ranges by move type
| Move scenario | Useful planning range |
|---|---|
| Single-wide, transport only | Often starts around $1,000-$5,000 for shorter, simpler moves |
| Single-wide, full service | Common planning band: about $4,000-$10,000 |
| Double-wide, full service | Common planning band: about $8,000-$20,000+ |
| Complex or long-distance move | Can exceed those bands when sections, route constraints, escorts, site work or distance increase |
What actually changes the price
Home size
Length, width, height, weight and section count affect equipment, permits and the number of transport movements.
Distance
More miles add fuel and driver time, but mileage is only one part of the bill.
Move scope
Transport-only and full-service relocation are different products. Ask exactly what teardown, setup and utility work is included.
Permits
Oversize or overweight movement may require state and local permits tied to the load and the roads used.
Escort needs
Load dimensions and route rules can trigger pilot or escort vehicles and other traffic-control requirements.
Site access
Tight turns, soft ground, slopes, gates, trees, overhead lines and limited staging space can change equipment and labor needs.
Get a quote built around the actual move
Have the origin, destination, home type and approximate dimensions ready. A move-specific quote is more useful than multiplying a generic per-mile rate.
Why a per-mile number can mislead
Costs that change with distance
- Fuel and line-haul time
- Driver and escort time
- Additional state permits on longer routes
- Overnight or scheduling complexity on some routes
Costs that may exist even on a short move
- Preparing the home for transport
- Permit applications and route review
- Positioning specialized equipment
- Disconnect, setup or reconnection work if included
What should be included in a useful quote?
Ask the provider to define these items
- Transport of each home section
- Permit procurement and permit fees
- Escort or pilot vehicles if required
- Any tire, axle or running-gear work
- Origin teardown or preparation
- Destination blocking, leveling or setup
- Utility disconnect or reconnection, if offered
- What conditions can change the final price
Permit fees are route-specific
There is no national flat permit price for moving a mobile home. State and local authorities regulate oversized movement on roads under their jurisdiction. In Ohio, for example, special hauling permits are tied to the vehicle or load and the requested movement. Cincinnati separately handles excess-load movement within city right-of-way. The practical lesson is simple: use permit examples to understand the process, not to predict the total bill for another route.
Expect a double-wide to cost materially more than a comparable single-wide because it moves as multiple sections and may require more permits, equipment, escorts and reassembly work. For early budgeting, many current consumer guides place full-service double-wide moves in roughly the $8,000-$20,000+ range.